1. <tbody id="y5rbp"></tbody>
    <tbody id="y5rbp"></tbody>

    <tbody id="y5rbp"></tbody>
    <th id="y5rbp"><table id="y5rbp"><thead id="y5rbp"></thead></table></th>
    <tbody id="y5rbp"></tbody>
    <small id="y5rbp"><listing id="y5rbp"><thead id="y5rbp"></thead></listing></small>

  • <tbody id="y5rbp"></tbody>

  • <code id="y5rbp"></code>

      1. <tbody id="y5rbp"></tbody>

        <bdo id="y5rbp"></bdo>
        <mark id="y5rbp"><tt id="y5rbp"></tt></mark>
        當前位置: 首頁 - 新聞資訊 - 常見問題 -

        共享不銹鋼風管的焊接方式有哪些?

        來源:http://www.boursomarket.com 日期:2021-10-27 發布人:jntfgd

        不銹鋼焊接風閥廠即將詳細介紹一些新的知識,進而讓大伙兒對不銹鋼風管的了解可以更加深入一步,下邊關鍵解讀的是不銹鋼鋼管的焊接類型。不銹鋼風管的焊接,常見的方式 有手工制作焊,通稱MMA,也有金屬材料極氣體保護焊和鎢極惰性氣體保護焊,金屬材料極氣體保護焊通稱MIG/MAG,鎢極惰性氣體保護焊通稱TIG。
        Stainless steel welding air valve factory will introduce some new professional knowledge in detail, so that everyone can have a deeper understanding of stainless steel air duct. The next key interpretation is the welding type of stainless steel pipe. The common welding methods of stainless steel air duct are manual welding, commonly known as MMA, metal material electrode gas shielded welding and tungsten inert gas shielded welding. Metal material electrode gas shielded welding is commonly known as MIG / MAG, and tungsten inert gas shielded welding is commonly known as TIG.
        方式 一:不銹鋼螺旋風管廠手工制作焊應用十分廣泛,且實際操作非常容易,主要是靠人開展調整,焊接添充原材料為不銹鋼焊條。手工制作焊基本上能焊接全部的原材料,即便在戶外也可以,因而它具備非常好的適應能力,一般焊接時是選用直流電源。不銹鋼焊條,既能夠 是鈦型焊絲,也可以是緘性的。鈦型焊絲較為非常容易焊接,焊接美觀大方,且焊穿非常容易除去。但缺陷是假如長期無需后再應用,那麼務必再次開展烤制,防止濕氣堆積。
        Method 1: the manual welding of stainless steel spiral air duct factory is widely used, and the actual operation is very easy. It is mainly adjusted by people. The raw material for welding is stainless steel electrode. Manual welding can basically weld all raw materials, even outdoors, so it has very good adaptability. Generally, DC power supply is selected for welding. Stainless steel electrode can be either titanium type welding wire or sealed. Titanium type welding wire is very easy to weld, the welding is beautiful and generous, and the welding penetration is very easy to remove. However, the defect is that if it is not needed for a long time, it must be baked again to prevent moisture accumulation.
        山東通風管道
        方式 二:金屬材料極氣體保護焊它歸屬于氣體保護焊,也是一種電弧焊接,是在維護氣體下,焊絲被電孤溶化。金屬材料極氣體保護焊可用以鋼、非碳素鋼、高合金鋼及其高鋁合金等這種原材料,應用很普遍。但有一點,它的維護氣體務必為特異性氣體,例如二氧化碳或是混和氣體等。
        Mode 2: metal material electrode gas shielded welding, which belongs to gas shielded welding and is also an arc welding. The welding wire is melted by electric arc under the maintenance gas. Metal material electrode gas shielded welding can be used as raw materials such as steel, non carbon steel, high alloy steel and its high aluminum alloy. However, its maintenance gas must be specific gas, such as carbon dioxide or mixed gas.
        的缺陷是假如在戶外開展焊接,那麼產品工件不可以返潮,不然會危害維護氣體的維護實際效果。方式 三:鎢極惰性氣體保護焊電孤是在鎢電弧焊接絲和產品工件中間造成,因此 規定維護氣體為純氬氣,且焊條不是感應起電的,因此 既能夠 手動式送進,也可以設備送進,有時候也可以不送進。隨后它到底是應用直流電源還是交流電流,則在于焊接原材料。鎢極惰性氣體保護焊主要是用以焊接薄和中等水平薄厚的產品工件,材料的范疇很廣,包含碳素鋼、鋁、鎂、銅、灰鑄鐵、鎳、銀、鈦及其鉛等。
        The defect is that if welding is carried out outdoors, the product workpiece cannot return to moisture, otherwise it will endanger the actual maintenance effect of maintenance gas. Mode 3: tungsten inert gas shielded arc welding arc is caused between the tungsten arc welding wire and the product workpiece. Therefore, it is specified that the maintenance gas is pure argon and the electrode is not inductively energized. Therefore, it can be sent manually, equipment or not. Then, whether it applies DC power supply or AC current depends on the welding raw materials. Tungsten inert gas shielded welding is mainly used to weld thin and medium thin and thick product workpieces. There are a wide range of materials, including carbon steel, aluminum, magnesium, copper, gray cast iron, nickel, silver, titanium and lead.
        以上就是山東通風管道http://www.boursomarket.com為大家介紹的內容,感謝您在百忙之中查看我公司的信息內容,如果您想要了解的更多,歡迎您來電進行咨詢!
        The above is Shandong ventilation duct http://www.boursomarket.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!
        上一篇:鋪設通風管道時對周圍環境的要求!
        下一篇:不銹鋼螺旋風管的加工難點要注意什么?
        >

        推薦產品

        • 廚房排煙
        • 廚房排煙
        • 軸流風機
        • 不銹鋼制品

        本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請及時與我們聯系,未經溝通本站不承擔相關法律責任!

        网易财经