1. <tbody id="y5rbp"></tbody>
    <tbody id="y5rbp"></tbody>

    <tbody id="y5rbp"></tbody>
    <th id="y5rbp"><table id="y5rbp"><thead id="y5rbp"></thead></table></th>
    <tbody id="y5rbp"></tbody>
    <small id="y5rbp"><listing id="y5rbp"><thead id="y5rbp"></thead></listing></small>

  • <tbody id="y5rbp"></tbody>

  • <code id="y5rbp"></code>

      1. <tbody id="y5rbp"></tbody>

        <bdo id="y5rbp"></bdo>
        <mark id="y5rbp"><tt id="y5rbp"></tt></mark>
        當前位置: 首頁 - 新聞資訊 - 公司動態 -

        通風管道安裝應滿足哪些條件?

        來源:http://www.boursomarket.com 日期:2020-08-12 發布人:gaoshitongferng

        安裝現場應劃定作業區域,并設置安全標志,禁止非作業人員進入進入。進入施工現場人員應穿戴防護用品,工作服的袖口、腰部和腿部應收緊。工作時,使用管道上方和下方的安全梯子。
        The installation site shall delimit the operation area and set up safety signs to prohibit non operation personnel from entering. Personnel entering the construction site shall wear protective equipment, and the cuffs, waist and legs of work clothes shall be tightened. When working, use safety ladders above and below the pipe.
        施工期間,應在高處搭建工作平臺或腳手架,工作平臺各節點與腳手架的連接應牢固可靠。工作平臺的寬度應滿足施工安全要求,平臺內踏板的鋪設應充分、穩定。
        During the construction, the working platform or scaffold shall be built at high place, and the connection between each node of the working platform and the scaffold shall be firm and reliable. The width of the working platform shall meet the construction safety requirements, and the pedal in the platform shall be fully and stably laid.
        使用過程中,應隨時檢查工作平臺和腳手架。當發生變形或位移時,應采取安全措施并及時確認。一般來說,排氣扇系統和空調系統應在建筑圍護結構施工完成、障礙物清除且地面無碎片后安裝。
        During use, the working platform and scaffold should be inspected at any time. In case of deformation or displacement, safety measures shall be taken and confirmed in time. In general, the exhaust fan system and air conditioning system should be installed after the building envelope construction is completed, the obstacles are removed and the ground is free of debris.
        山東通風管道
        Shandong ventilation pipeline
        通風管道安裝應滿足哪些條件?
        What conditions should ventilation duct installation meet?
        1.與管道相關的土建工程已通過檢驗,滿足安裝要求;2.設計資料和其他技術文件齊全,施工圖已經審查,山東通風管道施工組織設計只能完成和批準。
        1. The civil engineering related to the pipeline has passed the inspection and met the installation requirements; 2. The design data and other technical documents are complete, the construction drawings have been reviewed, and the construction organization design of Shandong ventilation pipeline can only be completed and approved.
        3.通風管道的生產廠家告訴大家,與管道連接的設備需要安裝固定到位,標高、中線、山東通風管道管口方位符合設計要求;
        3. The manufacturer of the ventilation pipe tells us that the equipment connected with the pipeline needs to be installed and fixed in place, and the elevation, central line and the orientation of the pipe orifice of Shandong ventilation pipe meet the design requirements;
        4.管道安裝前需要完成相關程序,如清洗、脫脂、內部防腐和內襯等。
        4. Before pipeline installation, relevant procedures should be completed, such as cleaning, degreasing, internal anti-corrosion and lining, etc.
        5.管道、管件、閥門經檢驗合格,并有相應的技術證書;
        5. The pipeline, pipe fittings and valves have passed the inspection and have corresponding technical certificates;
        6.管道、管件和閥門已按設計要求進行檢查,內部已清理干凈,無雜物。
        6. The pipes, pipe fittings and valves have been inspected according to the design requirements, and the internal parts have been cleaned and free of foreign matters.
        7.地下管溝開挖和安裝管廊施工完成。
        7. Excavation of underground pipe trench and installation of pipe gallery are completed. 上一篇:濟南通風管道如何才能抵制噪音?
        下一篇:廚房排煙工程安裝的靜音工作如何做到合理?
        >

        推薦產品

        • 廚房排煙
        • 廚房排煙
        • 軸流風機
        • 不銹鋼制品

        本站圖片均由網站所有方提供,部分圖片來源于網絡,如有任何疑問請及時與我們聯系,未經溝通本站不承擔相關法律責任!

        百姓彩